La piastra antiusura per pompa per calcestruzzo è un componente fondamentale nel sistema di pompaggio del calcestruzzo. Assomiglia a una montatura per occhiali, e quindi è spesso indicato come la piastra per occhiali.
La piastra antiusura è installata sulla parete posteriore della tramoggia in calcestruzzo. Ha due aperture. Ciascuna apertura è collegata all'estremità di uscita del cilindro di pompaggio del calcestruzzo. Durante il funzionamento di pompaggio, la piastra può fungere da guarnizione per la tramoggia offrendo allo stesso tempo protezione contro l'usura.
L'anello tagliente, o anello di usura, is mounted in the opening of the S-tube valve assembly. It protects the inlet end of the S-tube valve against wear.wear ring is often pressed against the wear plate. Its opening should be in alignment with one of the two openings of the plate. This allows the concrete coming from the outlet end of pumping cylinder to pass through the S-tube valve while a tight seal between the ring and plate can be formed. The ring can be swung away from the spectacle plate under the action of a crank arm. During this movement, a large shearing force is produced and acts upon the concrete aggregate to cut off its supply.
Specifiche di Piastra di usura della pompa per calcestruzzo:
Concrete pump wear plate and cutting ring
Resistenza alla trazione: >2500 N/mm2
Materiale: carburo di tungsteno
Modello: DN225
Dimensioni: upon your request
Corso della vita: 30,000~80,000cbm
HRA: ≥86
Applicazione: PM truck and trailer mounted concrete pump
S pipe matching small and big wear plate:
Putzmeister wear plate DN200/DN230
Putzmeister wear plate for C valve
Schwing wear plate DN200/DN230/DN250
IHI wear plate DN200/DN220
Kyokuto wear plate DN205/DN225
Sermac wear plate DN230
Mitsubishi wear plate
CIFA wear plate DN230
Devi essere loggato per lasciare un commento.