Use of concrete concrete pump rubber hose:
The whole machine can be operated on the worktable, or it can be operated by
cable or wireless remote control. The concrete pump rubber tube tower body has
the barrel shape, the square and the truss three kinds of forms.
Sheet of the concrete pump hose
|Specification||ID(mm)||OD(mm)||Working Pressure (bar)||Burst Pressure (bar)||Bend Radius (mm)||Weight (kg/m)|
The details of reducing concrete pump hose:
Structure: reducing concrete pump hose is composed of three parts: tube, reinforcement and cover.
Tube: resistant to high abrasion, mainly NR synthetic rubber.
Reinforcement: multiple layers of high tensile steel wires or polyester cords.
Cover: resistant to weather, ozone, corrosion, abrasion and cutting synthetic rubber, mainly cutting.
Temperature range: -30°C to +80°C.
The use of volume folding profitability, the vertical change in the amplitude of
the folding, slewing and climbing are hydraulic drive, hydraulic system using
dual-pump speed control plus throttling speed depreciation years, so that the
machine movement, smooth, reliable. Concrete pump rubber tube wall through
special treatment, has a certain pressure and wear resistance; concrete pump
rubber hose is a concrete machinery of the vulnerable parts are not optimistic,
because in the process of conveying concrete enterprises investment, concrete
will be concrete pump rubber hose wall caused a lot of pressure (ordinary
concrete pump more than 10 MPa), Coupled with concrete and concrete pump rubber
hose friction, concrete pump rubber hose wall will be thinner, and finally until
the damage, need to replace the new concrete pump rubber hose to urgently needed
Therefore, we must pay attention to the concrete pump rubber hose procurement
and maintenance. The use of concrete pump rubber hose but must pay attention to
maintenance, change pipe, cleaning can not be less to improve management, so as
to increase the life of concrete pump rubber hose, so that concrete pump rubber
hose hit the concrete side of a little more, save their own cost of high-tech,
make concrete pump rubber hose replacement time shorter, indirect to earn their
Why not, so be sure to pay attention to maintenance.
Concrete pump rubber hose widely used in concrete pump rubber hose, ground pump,
cloth machine, such as the end of concrete machinery, play a part-time role in
the transformation of the casting position, how to extend the use of concrete
pump rubber hose life? Let me introduce you to the following.
1, concrete pump rubber hose surface wrapped a layer of protective film, should
be prohibited before the use of demolition, played a role in sunscreen.
2, the need for concrete pump rubber hose should be handled lightly, to avoid
the damage caused by concrete pump rubber hose.
3, concrete pump rubber hose After the use of clean water to clear the remaining
concrete pipe to avoid the solidification of concrete.
4, concrete pump rubber hose in the use of the bending degree should not be
greater than 60 degrees, to prevent the formation of hose fracture.
5. Concrete pump rubber hose can only be placed at the end of concrete concrete
pump glue pipe.
Can not replace the elbow, concrete pump rubber hose use.
6, in the fixed storage of concrete pump rubber hose, can not use the wire to
tighten the fixed, to avoid the deformation of concrete pump rubber hose.
Our hoses are of good quality. The most ourstanding feature is our hoses have long working life. Now we have big customers in America, Austria and so on.
The advantage of reducing concrete pump hose:
It has less weight at the boom tip, making it easier to operate for workers.
It can control smooth concrete flow, and it can eliminate splatter.
It is convenient for the application of different diameters.