double-layer wear-resistant concrete pump pipe
Wednesday, 13 February 2019
by admin
Ceramic double-layer wear-resistant concrete pump pipe The construction of the ceramic outsourcing elbow is very simple, sub-management and outsourcing. The choice of the supervisor is the diameter of the pipeline installed on site. The internal selection of the external storage is 10-15mm larger than the outer diameter of the main pipe. According to the situation of the site, it is cut into the required length and the curved rear hoop porcelain. After the hoop porcelain on the outer tube, use The tung oil gel produced by our factory is
- Published in Concrete pump elbow
Twin wall concrete pump elbow,DN125 concrete pump spare parts
Tuesday, 24 July 2018
by admin
(1) Produce name: Concrete pump twin wall elbow/concrete pump double layer bend (2) Degree: 10D/15D/30D/45D/90D (3) Material: St52, 13Mn etc. as requirement (4) Bend Radius: R180/R190.5/R240/R275 (5) Working life: 30000cbm-50000cbm (6) Technics: Casting or Welding (7) Thickness: inner arc thickness: 10mm-11mm, outer pipe thickness:3-4mm, welding end thickness: 7-8mm concrete pump bend or elbow Reference sizes DN125 5 OD133XV-R 90R275mmX WT4.5mm OD133XV-R 60R275mm X WT4.5mm OD133XV-R 45R275mm X WT4.5mm OD133XV-R 30R275mm X WT4.5mm OD133XV-R 15R275mm X WT4.5mm OD133XV-R 90R260mm X WT4.5mm OD133XV-R 60R260mm X WT4.5mm OD133XV-R 45R260mm X WT4.5mm OD133XV-R 30R260mm
- Published in Concrete pump elbow
Tagged under:
Concrete pump elbow
concrete pump twin wall elbow DN125*R275*15D
Friday, 06 July 2018
by admin
DN125*R275*15D concrete pump twin wall elbow material:Q235+Gcr15 weight4.5kg working pressure:85bar lifetime:45,000-60,000CBM surface powerd coated and baked painting. item name specifications flange Material thickness application 1 concrete pump elbow DN125 R275 90D 148mm Mn13-4 8mm used for PM, Schwing, Zoomlion and so on concrete pump 2 concrete pump elbow DN125 R275 45D 148mm Mn13-4 8mm 3 concrete pump elbow DN125 R275 30D 148mm Mn13-4 8mm 4 concrete pump elbow DN125 R275 15D 148mm Mn13-4 8mm 5 concrete pump elbow DN125 R180 90D 148mm Mn13-4 8mm 6 concrete pump elbow DN125 R260
- Published in Concrete pump elbow
ST52 Concrete Pumping Elbow,Concrete pump elbow
Thursday, 21 June 2018
by admin
Concrete Pumping Elbow mainly include single wall elbows, double layer(twin walls) elbows,wear-resisting elbows, advanced technology, work life long. ST52 Concrete Pumping Elbow Material: 45Mn2 / 55Mn Wall Thickness: 4.5/ 5.0/ 7.0mm Length: 1m, 2m, 3m, or according to client’s requirements Degree:15D, 30D, 45D, 60D, 90D Extension: 170mm, 211mm, 411mm Color:White, Red, Yellow, Green, Blue can be customized Complete with SK 148mm twin wall flange, HD, PM ZX 175mm, Schwing MF 166mm, Sany 157mm, Zoomlion ZX etc. Welding technique: automatic welding Surface Treatment: powder painted and baked Working Pressure: SK type:
- Published in Concrete pump elbow
Tagged under:
Concrete pump elbow
concrete pump 90 Degree Bend Pipe,90 Degree Bend Elbow
Thursday, 21 June 2018
by admin
The Features for concrete pump 90 Degree Bend Pipe: 1.Unique design, High hardness, light weight, long service life 2.Germany automatic welding equipment,over level II weld quality. Reliable quality, aesthetic appearance specifications of concrete pump 90 Degree Bend Pipe Material: high manganese 13Mn-4 Weight: 14kg Processing way : casted Size: DN125*R275*90D Flange size : SK148mm Referece lifetime: 18000CBM. Allow aggregate maximum particle size : 15mm Connection type : clamp Cleaning way : use cleaning ball concrete pump truck construction spare parts twin walls Dear Krishi. 9… China distributor truck mounted concrete pump
- Published in Concrete pump elbow
St52 concrete delivery elbow, Concrete pumping welding elbow
Wednesday, 30 May 2018
by admin
1.material: carton steel , casting elbow 2.lifetime: 20000-80000cube 3.surface treatment: baking paint 4.application: used for PM, Schwing, Sany, Zoomlion and so on concrete pump item name specifications flange Material thickness application 1 concrete pump elbow DN125 R275 90D 148mm Mn13-4 8mm used for PM, Schwing, Zoomlion and so on concrete pump 2 concrete pump elbow DN125 R275 45D 148mm Mn13-4 8mm 3 concrete pump elbow DN125 R275 30D 148mm Mn13-4 8mm 4 concrete pump elbow DN125 R275 15D 148mm Mn13-4 8mm 5 concrete pump elbow DN125 R180 90D 148mm Mn13-4
- Published in Concrete pump elbow
concrete pump boom elbow,high pressure concrete pump pipe elbow
Wednesday, 09 May 2018
by admin
The Concrete Pump Boom Elbow is made of special quality steel which is quenched and carried out carburizing chemical treatment on the inner wall.The concrete pump pipes and elbows are suffering serious abrasion & impact problems because of the high speed pump concrete. The normal carbon steel pipes under such high abrasion and impact condition are very easy to wear out. The hardness of the flanged bushings can reach 58-60 degrees and the serving life of pipeline can increase 3-5 times,which enables users to save time and cost, enhancing the
- Published in Concrete pump elbow
Concrete placing boom elbow,Distributor,DN125,2 Arms/3 Arms/ 4 Arms
Friday, 06 April 2018
by admin
Wear Resistant Concrete Pump Pipe Elbow 45 Degree, 90 Degree Bend Elbow Technology: Concrete pump elbow,bend pipe is quenched and carried out carburizing chemical treatment on the inner wall. So it has high wear resistance.Twin walls elbow the inner layer is made of high hardness wear resistant alloy stll by hear treatment and the outer tube is high toughness and low hardness and low carbon steel,which can guarantee the construction safety. Product Name Concrete Pump bend Elbow Inner characteristic the inner layer of this concrete pump elbow undergoes heat
- Published in Concrete placing boom, Concrete pump elbow
Dn125 concrete pump elbow-putzmeister concrete pump spare parts
Wednesday, 21 March 2018
by admin
ST52 Truck Mounted Concrete Boom Pump double layer elbow ,DN125 Concrete Pump wear resistant pipe elbow Wear-Resistant Concrete Pump Pipe / Single or Double Concrete Pump Elbow Type Single Elbow Double Elbow Model DN125 DN150 DN175 DN125 Material Casting Steel , ST52 Inside(40Cr) Outside Size R275*90° R275*90°+110 36° F2000 R275*90° R275*90°+110 R275*45° R275*90°+211 R400*30° A3000 R275*45° R275*90°+211 R275*25° R275*90°+411 R400*45° 471B R275*25° R275*90°+411 R275*20° R275*90°+424 R400*30° 571B R275*20° R275*90°+424 R275*15° R275*45°+170 R488*90° A1000 R275*15° R275*45°+170 R180*90° R275*45°+310 R500*90° C1000 R180*90° R275*45°+310 R232*60° R275*45°+310 R280*90° B2000 R232*60° R275*45°+310 R240*36° 20°Lengthen R240*36°
- Published in Concrete pump elbow
Concrete Pump Elbow Wear Resistant Bend for Schwing and Putzmeister truck
Friday, 22 December 2017
by admin
CZPPpremier boom pipe elbow and bend offering, Wear Resistant pipe has the longest service life on the market and is ideal for high-volume pumping under extreme wear conditions. This ultra wear-resistant pipe is made of a static outer pipe with an inner pipe with heat-treated hardness up to 65 HRc. It is fitted with two patented twin-cast Big Mouth flanges to prevent the radical transfer of destructive wear from the elbow to the straight pipe. A unique welding process results in no heat-affected areas of the pipeline. Our elbows are high manganese steel casting and flanges are casted together and machined to finish which strengthens quality. The service life is 25,000-30,000 cubic meters and can be used on Schwing, Putzmeister, Kyokuto, Cifa, Sany, Zoomlion, etc, boom pumps. Product
- Published in Concrete pump elbow
Putzmeister No.1 Flat Reduce Concrete Pump Elbow
Wednesday, 06 December 2017
by admin
On the Concrete Mobile Pump , there is not only normal elbow bend , also have 1#,2#flap elbow on it. We have Putzmeister 1# flap elbow, 2#elbow, zoomline concrete pump hinge flat elbow, Sany concrete pump flap elbow and so on. This kind of concrete pump hinge flat elbow material is same with normal elbow material, which is made by 45Mn2 and high manganese steel, but this flap elbow usually service life is longer, and more thicker , especially the concrete pump end elbow, service life is 50000cbm-80000cbm , the
- Published in Concrete pump elbow
concrete pump parts lengthen Elbow
Wednesday, 06 December 2017
by admin
CZPPhave been supplying concrete pump parts for SCHWING, PUTZMEISTER, SANY, CIFA, KYOKUTO, ZOOMLION for many years. Specifications: Elbow-DN125 x R275 x90D Rigitiry: 62-65HRC Service life: 25,000-35,000CBM Material: Carbon steel Product profile: The double layer concrete pump elbow is developed by ourselves through new technology and process. Characteristic: the inner layer of this concrete pump elbow undergoes heat treatment, and then the rigitiry can reach 62-65HRC Characteristic: the outer layer of the concrete pump elbow possess good toughness properties to protect the inner layer, so the security of the elbow is
- Published in Concrete pump elbow
Tagged under:
concrete pump parts lengthen Elbow