Concrete pump placing boom is the terminal device for pumping concrete, which is used to deliver the pumped concrete through a pipe to the template to be poured. Category: Hydraulic concrete pump placing boom, manual concrete pump placing boom (12 meters, 15 meters, 18.3-meter)  According to the concrete construction of different pouring environment and personality requirements, has designed for users of the interior crawl type, walking,
Ship-mounted, manual and many other models, forming the current global specifications of the most complete HG series concrete pump placing boom. Structure:, the latch ⒁, the ⑵ of the frame, constitute the base is the fixed part, it is connected with the upper slewing part by the slewing support ⑶, on the main beam frame ⑼, the balance arm ⑸, the balance arm frame lever ⑹, the upper bar ⑽ compose the rear turning part. The riser ⑻ has a rotary card connector. Through the human pull, can make the whole rotary part of 360 degrees. Beam main frame ⑼ front connection has a slewing bearing ⒂ and front bar ⑿, front pull Rod ⑾ constitute the front turning part, can revolve the slewing bearing ⒂ rotate 300 degrees in the manpower pull. The synthetic motion consisting of two parts of the rotary frame can cover all the cloth points in the radius of the cloth.
Manual type concrete pump placing boom
Manual type concrete pump placing boom (cloth rod) Introduction Concrete pump placing boom is a new product developed to enlarge the pouring range of concrete and improve the mechanization of pumping construction. It is a supporting equipment of concrete conveying pump, which is connected with concrete conveying pump, and expands the range of concrete pump delivery. It effectively solves the problem of the wall pouring cloth, and plays an important role in improving the construction efficiency and alleviating the labor intensity.
This concrete pump placing boom design is reasonable, the structure is stable and reliable, the use of 360° full swing arm-type fabric structure, the whole machine easy to operate, rotating flexible, with high efficiency, energy-saving, economic and practical characteristics.
Stationary type concrete pump placing boom Fixed type concrete pump placing boom: special concrete pouring cloth equipment specially designed for construction of railway beam field, nuclear power and other projects; mobile concrete pump placing boom “Z”-shaped folding arm, 360° slewing, Can be pitching and folding amplitude, in the range of the arm length, the three-dimensional space is poured, without casting dead angle, the concrete pouring of the wall, pipe, column and pile can be realized conveniently, and the interior climbing type concrete pump placing boom is the cloth equipment of the high-rise building concrete construction.
Ship-carrying type concrete pump placing boom is a special ship-borne material equipment for construction design and production of harbor and wharf.
1, concrete pump placing boom before use must check the two sections of the tube at the rotation of the tube card is stable and damaged.
2, concrete pump placing boom should be placed horizontally, such as the occurrence of tilt should immediately stop the fabric, resettlement.
3, concrete pump placing boom in the use of the process, to check and maintain at any time.
4, strictly according to the manual operation standard construction.
Concrete pump placing Boom’s product features: BLG18 meters, 15 meters, 12 meters of cloth rod using slewing, ARM-type fabric structure, cloth range of 690 square meters, with 125mm*5.0mm seamless conveying pipe, 360 degrees slewing, the whole machine manual operation.
With simple structure, strength, rigidity, simple operation, flexible, easy maintenance and other characteristics, with the use of concrete pump can be widely used in civil and industrial construction of concrete pouring project
The concrete pump placing boom has six major characteristics compared to the current market for ordinary concrete pump placing boom.
1. Frame type big arm structure, increase bearing gravity, stability.
2. High quality slewing bearing, flexible and soft rotation.
3. Double support legs, improve double stability and endurance
4. Adopt the fine national standard square steel, the firmness compares angle to strengthen several times.
5. The impact on the appearance of vibration is slight.
6. With four cables to ensure stable and safe product application
Concrete pump placing boom working principle concrete pump placing boom the feed pipe front end is connected with the concrete pump piping end, constitutes the complete pumping construction transmission pipeline, the concrete in the hopper is under the pump work pressure, Through the concrete conveying pipeline and the main girder and the manual tube of the rotation continuously sent to the construction site cloth range. When playing concrete concrete pump placing boom how to place concrete pump placing boom must work during work, only so that it can work properly. First: The concrete pump placing boom can be fixed on the construction site using ropes. The most common way to use ropes is to use the ropes to connect the concrete pump placing boom base to the construction site without any extra cost. Second: The concrete pump placing boom fixing device can be used to fix the construction site. Concrete pump placing boom’s fixing device comprises a supporting base supporting a vertical bar and a scissors brace, a support pole is welded on a supporting base, and a scissors brace is welded on a supporting shaft, and the supporting rod is used for connecting with a variable cutting rod of the supporting leg. The utility model discloses a concrete pump placing boom fixing device, which is convenient, safe, reliable and economical to be disassembled.
Other users also browsed the following knowledge: concrete pump placing boom reinforcement operation method Concrete pump placing boom use.